InSight SEIS Seismometer                          
SEED Channel Configuration for SEIS Data - Network XB                    
                           
Owner C. Pardo - Mars SEIS Data Service                    
Issue: 2                    
Revision: 8                    
Last Modification: September 10, 2015                    
LocId and Channel codes are the same as the original raw data input.
(Except when signal is rotated, then UVW become XYZ)
ONLY BOXES FOR WHICH THE OUTPUTS ARE SAVED AS mSEED ARE LISTED.
Example: Initial data is low gain position data in nomical case
Initial locID.CHA ELYS.00.VMU Raw data
Black Box Number / Name
Station Code Description
B01 EP010 Main Box Output EP010.00.VMU Start of processed data
EP011 Difference (In-Out) - Removed low frequency signal EP011.00.VMU
B03 EP030 Main Box Output EP030.00.VMU
EP031 Difference (In-Out) -- Shows glitch and spike locations EP031.00.VMU
B04 EP040 Main Box Output EP040.00.VMU
EP041 Difference (In-Out) -- Polarized noise EP041.00.VMU
B05 EP050 Main Box Output EP050.00.VMU
EP051 Difference (In-Out) -- VEL/POS Integrator Noise EP051.00.VMU
B08 EP080 Main Box Output EP080.00.VMU
EP081 MAG1 decorellated noise EP081.00.VMU
EP082 MAG2 decorellated noise EP082.00.VMU
EP083 MAG3 decorellated noise EP083.00.VMU
B09 EP090 Rotated Data EP090.00.VMX Rotated data (U/V/W becomes X/Y/Z)
B10 EP100 Main Box Output EP100.00.VMX
EP101 PRESS Decorrelated Noise EP101.00.VMX
B11 EP110 Main Box Output EP110.00.VMX Data used for automatic event identification
EP111 VBB1 Decorrelated Noise EP111.00.VMX
EP112 VBB2 Decorrelated Noise EP112.00.VMX
EP113 VBB3 Decorrelated Noise EP113.00.VMX
EP114 VBBFB1 Decorrelated Noise EP114.00.VMX
EP115 VBBFB2 Decorrelated Noise EP115.00.VMX
EP116 VBBFB3 Decorrelated Noise EP116.00.VMX
EP117 SCIT Decorrelated Noise EP117.00.VMX  
STA/LTA - Kurtosis EP200 STA/LTA Output EP200.00.VMX
& STA/LTA from ESTA EP201 Kurtosis Output EP201.00.VMX